The Fabric System offers various solutions for trade shows, conferences, store displays, and portable exhibition products. Fabric graphics are attached to frames constructed from slim-type aluminum profiles, which can be affixed to furniture or metal structures. This system allows for the creation of straight-line independent wall booth designs, replacing hardware or carpentry structures with an assembly-type profile frame that facilitates convenient transportation and installation. Printing on tension fabric ensures high-quality finishing and a sleek appearance.
Due to the thin profile of 12mm, fabric system can be installed inside other structures made of wood or metal using self-drilling screws.
- Backlit possible · Substitute for banners
- No distortion in graphics.
Product specifications
※ Minimum width, height over 500mm / One side limited to maximum 3,000mm. (For other sizes, please inquire.)
Finished with tension fabric graphics on a slim frame of 22mm.
Silicon is adhered around the fabric graphic and inserted into the frame for finishing.
- 22mm profile
- Tensioned fabric graphic
- Backlit not an option
Product specifications
※ Minimum width, height 750mm / One side limited to maximum 3,000mm. (For other sizes, please inquire.)
Independent fabric system for wall panels.
A product designed to replace photo zone and graphic wall installations previously constructed using traditional block or carpentry systems.
- 40mm profile
- Tensioned fabric graphic
- Backlit possible
Product specifications
※ Minimum width, height 750mm / One side limited to maximum 3,000mm. (For other sizes, please inquire)'
Double-sided LED light box.
Graphics can be attached on both sides of the aluminum structure.
Lighting: 20 LED modules (24V 4.2W) per 1M2 side / 1 SMPS 220V 100W
Product specifications
※ Minimum width, height of 750mm / One side limited to maximum 3,000mm. (For other sizes, please inquire)
Fabric System 66.5F
Fabric System 12F
Fabric System 12F
Fabric System 40F
Fabric System 40F
Fabric System 40F
Fabric System 40F